Product Description; First Use; Sensor Function; Charging - RECA R280S Instrucciones De Uso

• This product is not a toy to be played with.
• Keep out of the reach of children!
• Failure to observe the safety instructions can result in dangerous injuries to persons or
damage to the device!
• The operating instructions for devices to which the USB connection will be connected
must also be read
• Always keep the product dry
ATTENTION
• The product contains a non-replaceable Li-Ion rechargeable battery. Do not throw the
product into a fire!
• The product may only be charged in closed, dry and spacious rooms, away from com-
bustible materials and liquids. Disregard can result in burns and fires.
• Never open, crush or heat a rechargeable battery or set it on fire.
• Do not use the product in potentially explosive areas or in the rain and do not expose it
to excessive heat.
• Do not use the product if it appears to be damaged

Product description

1. Main light
2. Head band holder with adjustable tilt angle
3. Head band
4. On/off button
5. Switch sensor
6. Micro-USB charge socket
7. LED charge display
8. Sensor mode indicator
9. Sensor
I

First use

The lamp is switched on/off with the on/off switch.
Press 1x: LED 30%
Press 2x: LED 100%
Press 3x: OFF

Sensor function

The sensor mode is activated by the sensor button.
Then the LED can be switched on and off with gesture control (distance ca. 10cm).
I

Charging

Charge the lamp fully before first use. Likewise, when storing over an extended period of
time, charge beforehand and charge at least 2x per year during storage in order to prevent
the rechargeable battery pack deep-discharging.
To charge the lamp unscrew the sealing cap. Connect the Micro-USB cable with the lamp
and then with a USB charger.
I

LED charge level indicator:

The lamp has a professional LED charge level indicator
9