This air mover has the ability to connect up to three units together to maximize air circulation.
To do this, plug the first unit into a grounded electrical outlet. Then plug a second unit into the
receptacle of the first unit. A third unit can then be plugged into the receptacle of the second unit.
(Other units sold separately.)
WARNING:
of overheating or overload, ensure area around intake grills are clear to allow for
unobstructed air flow.
WARNING
plugged into the wall outlet, should never exceed 10A. Do not use an extension cord
to connect units, or to connect a unit to the wall outlet.
Do not stack air movers vertically during operation. To reduce risk
: The total rated amperage for all units, running through the unit
8