Technical Specifications - GYS POWER PACK 520 Manual Del Usuario

Translation of the original instructions
ACCESSORIES
15
USB cable
16 Mains charger

TECHNICAL SPECIFICATIONS

Capacity
Size (L x W x H)
Weight
Internal battery technology
Input
Wall adapter
USB Ports
Charging time
"Output voltage plug
Cigarette lighter"
USB Quick Charge
Dual USB output
Dual AC output
Battery indicator
Charge temperature
Discharge temperature
Service life
Protections
LCD ILLUMINATED DISPLAY
The LED display shows the internal battery capacity as well as the inputs and outputs used on the POWER PACK
520. Press button (1), the LCD display will light up. In case all outputs are inactive: after 10 seconds of inactivity, the
backlight will turn off. After 30 seconds of inactivity, the display will turn off. The POWER PACK 520 will automatically
switch to standby.
State of charge of the battery
In charge
Error
Active USB outputs
USB-C output active
Active USB outputs
Active 12 Vdc outputs
LED on
AC output open
The POWER PACK 520 is active. It is discharged because there is a consu-
mer on one of its outlets and cannot go into standby mode.
10
POWER PACK 520
20 Ah / 518 Wh
264 x 234 x 163 mm
5.14 kg
Lithium-Ion Polymer Battery (7 cells)
DC input 24 V / 2.5 A - PV / solar panels - car charger 11 V - 30 V
100 V - 240 V, 50/60 Hz, 1.2 A max
5 V / 3 A, 9 V / 3 A, 12 V / 3 A, 15 V / 3 A, 20 V / 2.25 A
9.5 h with 24 V /2.5 A adapter; 9.5 h with 60 W solar panels
16 h with car charger; 12.5 h with 45 W USB adapter
5.5 h with DC input and USB Type-C adapter simultaneously
11.5 V ~ 12.5 V / 12 A total (single port 10 A max)
5 V / 3 A, 9 V / 2 A, 12 V / 1.5 A
5 V / 3.1 A total (single port 2.4 A max)
230 V / 50 Hz / 500 W (PSW - Pure Sine Wave)
LCD display
0°C ̶ 50°C (32°F ̶ 122°F)
-20°C ̶ 50 °C (-4°F ̶ 122°F)
1000 charging cycles
Short-circuit protection, overcurrent protection, overvoltage protection, undervoltage
protection, overload protection, temperature protection.
EN