Declaration Of Conformity - Worx Professional WU278.1 Manual Original

PLUG REPLACEMENT
( UK & IRELAND ONLY )
If you need to replace the fitted plug then follow
the instructions below.
IMPORTANT
The wires in the mains lead are colored in
accordance with the following code:
BLUE =NEUTRAL
BROWN = LIVE
As the colors of the wires in the mains lead
of this appliance may not correspond with the
colored markings identifying the terminals in
your plug, proceed as follows. The wire which is
colored blue must be connected to the terminal
which is marked with N. The wire which is colored
brown must be connected to the terminal which
is marked with L.
WARNING! Never connect live or neutral wires
to the earth terminal of the plug. Only fit an
approved 13ABS1363/A plug and the correct rated
fuse.
NOTE: If a moulded plug is fitted and has to
be removed take great care in disposing of the
plug and severed cable, it must be destroyed to
prevent engaging into a socket.
Connect
Blue to N
(neutral)
Outer sleeve
firmly clamped
All manuals and user guides at all-guides.com
13 Amp fuse approved
to BS1362
Brown L (live)
Cable grip
DECLARATION OF
CONFORMITY
We,
POSITEC Germany GmbH
Konrad-Adenauer-Ufer 37
50668 Köln
Declare that the product,
Description WORX Cordless Impact Wrench
Type WU278.1 (278-designation of machinery,
representative of Impact Wrench )
WU292 WU292 .1(292-designation of
machinery, representative of Impact Driver )
Function Tightening and loosening screws,
nuts
Complies with the following Directives,
2006/42/EC, 2004/108/EC, 2011/65/EU
Standards conform to
EN 55014-1,
EN 55014-2,
EN 60745-1,
EN 60745-2-2
The person authorized to compile the technical
file,
Name Russell Nicholson
Address Positec Power Tools (Europe)Ltd, PO
Box 152,Leeds,LS10 9DS,UK
Suzhou 2014/12/15
Allen Ding
Deputy Chief Engineer,Testing &
Certification
13