Caliber RMD 053DAB Manual Del Usuario página 3

RMD NOTES
Note the serial number of your device here for future reference:
E.G:321163/000000
(This number can be found on the top-label on the head-unit)
RMD SPECIFICATIONS
General:
Power supply
Max power output
RMS power output
Suitable speaker impedance
Fuse
Dimensions (WxDxH)
Radio:
FM Stereo Radio
Frequency range
Signal/noise ratio
Radio sensitivity
DAB Stereo Radio
Frequency range
Band
Antenna type
USB / SD:
USB charge output
Note:
Specifications and the design are subject to change without notice due to improvements in technology.
We are continuously improving/updating our products and product information.
It's therefore possible that there is a slight difference between the description in this manual to the operation
of the product. If something is different or not clear; always check our website for the most current version.
12V DC
neg. ground
75Wx4 channels
20Wx4 channels
(4Ω 10% T.H.D.)
4-8 ohm
10A
190x133x59mm (outer sizes)
178x108x50mm (built-in part)
87.5-108.0 MHz
(Europe)
50dB
10dB
174 ~ 240MHz
III
Screen mount / male SMA connector / active
(with +5V phantom power source)
5V, max. 1.1A