Turn Specific Equipment On/Off Manually - Polaris PAC PAGAUT Manual Del Propietário

Pool Automation Control | Owner's Manual
Polaris PAC
®
™
Set the System Clock:
MAIN > SETTINGS > CLOCK
Set the current day of the week and time. This setting is
the time clock basis for defining schedules for the filter
pump and other equipment.
Settings
Settings
Clock
Clock
Schedule
Schedule
• Current programmed day flashes when selected.
Scroll through days of the week to display desired
day, then press Select.
• Current programmed time (hour) flashes when
selected. Scroll through 24 hours to display
desired time, then press Select.
• Current programmed time (minutes) flashes when
selected. Scroll through 60 minutes to display
desired time, then press Select.
Define Specific Equipment ON/OFF Schedules:
MAIN > SETTINGS > SCHEDULES
Define automatic ON and OFF times for specific
equipment in your installation. You may set different
schedules for any single day, weekdays, weekends, or
assign the same schedule for all days. Set a maximum
of ten programs combined.
Define schedules for the following equipment as
applicable:
• Filter Pump
• Pool Heater
• Solar Heater (if applicable)
• Aux1, Aux2, and Aux3 (as applicable)
You will only see equipment listed in the menu if
NOTE:
it is installed as part of your system.
Example: Define Filter Pump Schedule
MAIN > SETTINGS > SCHEDULES > FILTER PUMP
Example shown is for defining the filter pump
NOTE:
schedule. The procedure to define or change
ON / OFF times for all equipment listed in
Schedules Menu is identical to defining Filter
Pump schedule.
• Choose CHANGE to change the current displayed
schedule for selected equipment.
• Choose DELETE to remove the current schedule
from system programming. The system asks for
verification: Delete? No Yes.
SET CLOCK
SET CLOCK
Monday
Monday
1:04AM
1:04AM
Filter Pump
Prgm: 1 of 1
ON: 10:30AM
OFF: 7:45PM
DAYS: Weekdays
New >
Change >
Delete >
Filter Pump
Prgm: 1 of 1
ON: 10:30AM
OFF: 7:45PM
DAYS: Weekdays
New >
Change >
Delete >
Filter Pump
NEW SCHEDULE
ON: 09:00PM
OFF: 11:00PM
DAYS: Tuesday
SAVE
Filter Pump
NEW SCHEDULE
ON: 09:00PM
OFF: 11:00PM
DAYS: Tuesday
• If there is no schedule currently set up for the
selected equipment, the system displays the
message: No Schedules Entered. Choose NEW to
begin programming a schedule.
• If there is more than one schedule currently set up
for the selected equipment, the system indicates
total number of programs currently entered for this
equipment (e.g., Program 2 of 2).
• Set ON time and OFF times:
– Current programmed time (hour) flashes when
selected. Scroll through 24 hours to display
desired time, then press Select.
– Current programmed time (minutes) flashes when
selected. Scroll through 60 minutes to display
desired time, then press Select.
• Set DAYS:
– Current programmed day flashes when selected.
Scroll through days of the week to display desired
day, ALL DAYS, WEEKENDS, or WEEKDAYS,
then press Select.
• When you select SAVE to enter new program data,
the system indicates total number of programs
currently entered for this equipment (e.g., Program 2
of 2).
8.5 Turn Specific Equipment On/Off
Manually
MAIN > DEVICES
Example: Define Filter Pump Schedule
SCHEDULES
Filter Pump >
Filter Pump
Temp 1 >
NEW SCHEDULE
Aux 1 >
Aux 2 >
ON: 12:00AM
Aux 3 >
OFF: 12:00PM
DAYS: O
Back
Select
SAVE
Filter Pump
NEW SCHEDULE
ON: 12:00AM
OFF: 12:00PM
DAYS: O
SAVE
Filter Pump
Prgm: 2 of 2
ON: 09:00PM
OFF: 11:00PM
DAYS: Tuesday
New >
Change >
Delete >
Filter Pump
Prgm: 2 of 2
ON: 09:00PM
OFF: 11:00PM
DAYS: Tuesday
Page 13
ENGLISH
Filter Pump
Prgm: 1 of 1
ON: 10:30AM
OFF: 7:45PM
DAYS: Weekdays
New >
Change >
Delete >
Filter Pump
SCHEDULE
Prgm: 1 of 1
Filter Pump
ON: 10:30AM
No programs
OFF: 7:45PM
entered
DAYS: Weekdays
New >
NEW >
Change >
Delete >
Back
Select
Filter Pump
NEW SCHEDULE
ON: 09:00PM
OFF: 11:00PM
DAYS: Tuesday
SAVE
Filter Pump
NEW SCHEDULE
ON: 09:00PM
OFF: 11:00PM
DAYS: Tuesday
SAVE