Table of Contents
Assembly . . . . . . . . . . . . . . . . . . 4
Operation . . . . . . . . . . . . . . . . . . 5
Safety Precautions
WARNING
Before using an electric tool with this product, read and follow the tool manufacturer's
instructions and safety precautions in addition to the safety precautions below to reduce risk of
serious injury from hazards such as fire, electric shock, or rotating drill bit.
■
Always follow the written safety instructions for using your jig.
■
Follow your drill manufacturer's safety guidelines.
■
Always wear personal protective equipment certified as such, including safety glasses,
hearing and respiratory protection. When using a power tool, always follow the manufacturer's
personal protective equipment requirements.
■
The drill bit is sharp. Handle with care.
■
Do not attempt to hold the jig in place with your hand while drilling. Secure the jig in place
with a clamp.
■
Do not allow familiarity gained from frequent use of your tools to replace safe work practices.
A moment of carelessness is sufficient to cause severe injury.
WARNING
Avoid awkward hand positions where a sudden slip could cause contact with the
rotating blade.
WARNING
Do not operate this tool or any machinery while under the influence of drugs, alcohol,
or medications.
WARNING
This product can expose you to chemicals including Acrylonitrile and other chemicals,
which are known to the State of California to cause cancer and reproductive harm. For more
information go to www.P65Warnings.ca.gov.
WARNING
Drilling, sawing, sanding, or machining wood products can expose you to wood
dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or
use a dust mask or other safeguards for personal protection. For more information go to www.
P65Warnings.ca.gov.
2
Tips . . . . . . . . . . . . . . . . . . . . . 8