Multifunction Button - Bestway FLOWCLEAR 58700 Manual Del Usuario

CHARGING
Connect the included USB cord to the USB port and plug it into a 5V USB outlet
and the DC jack to the CT602. During charging, the LED indicator light will remain
red. When the battery is full, the LED indicator will turn green.
NOTE:
• Use the included cable and respect the voltage!
• Please charge before use.
• Before inserting the charger, dry the charging port.
BUTTON FUNCTION DESCRIPTION

Multifunction Button:

• Hold the button down for 3 seconds to power on, and hold again for 3
seconds to power off.
• When playing music, press this button to pause music, and press again to
continue playing music.
• When a call is incoming, press the button to answer the phone, and push
again to hang up the call.
"Volume - and Previous" Button:
Press the button to play the previous track, and hold the button down to reduce
the volume.
"Volume + and Next" Button:
Press the button to play the next track, and hold the button down to increase
the volume.
Light Mode Button:
• Press to switch through the different LED modes.
• Hold down the light button for 5 seconds to remove Bluetooth pairing.
BLUETOOTH PAIRING SETTINGS
Hold down the multifunction button for 3 seconds to power on. Wait until the blue
light flashes, then open the bluetooth mode on your smartphone and select "CT602"
to pair the device. It's now paired. You can broadcast your music! If not, start again
or relaunch the CT602.
3