Orbegozo PE 2710 Manual De Instrucciones página 8

PE 2710 PE 2750 PE 2810 PE 2850 PE 2910 PE 2950
- Do not use the device connected to an external timer
or a separate remote control system.
- The use of accessory attachments not recommended
by the appliance manufacturer may cause hazards.
- Do not let cord hang over edge of table or counter, or
touch hot surfaces.
- Do not place on or near a hot gas or electric burner, or
in a heated oven.
- Do not clean with metal scouring pads. Pieces can
break off the pad and touch electrical parts, creating a
shock hazard.
CAUTION: For safety's sake, when using non-stick cookware or electric appliance with nonstick coatings,
keep your pet birds out of the room. Birds have respiratory systems that are sensitive lo many kinds of
fumes, including fumes from overheated nonstick.
USING THE HOT PLATE
1. Set cooking plate on a flat, dry heat resistant surface.
2. Turn temperature control dial to "O".
3. Plug cord into outlet.
4. Turn control dial from "O" to any selected setting (being "1" minimum one and "5", maximum one).
5. Heating Element will begin to heat immediately. DO NOT touch while in use the metal surfaces will
become hot.
6. The light indicates that the plate is getting warm. Once it reaches the selected temperature, the light
turns off again.
7. When not in use, unplug the cord from wall outlet and allow until it gets cool.
CAUTION
DO NOT use pans that are unstable and easily tipped. Use flat-bottom pans to insure full contact with
HEATING PLATE for maximum heat efficiency.
For long-life performance, avoid dropping any items on the HEATING PLATE.
When first time use this hot plate, there are some smoke, it's normal and safety.
8