Telstar NutriMax Mini TBL900210MD Manual De Instrucciones página 11

INSTRUCTIONS FOR USE
2
Lock
3
ON
Unlock
• Blades are sharp! Use extreme caution when handling the blade assemblies.
Always hold them by the base of the blade assembly.
• DO NOT PROCESS HOT FOODS OR HOT LIQUIDS. Do not process food that
is hotter than 70ºC. Allow very hot ingredients to cool before processing. This
product is not suitable for mixing dry food.
• Never attempt to remove the jar while the appliance is still running.
• Never leave the appliance unattended while in use
1.
Remove all packaging material and labels from the appliance.
2.
Wash the lids, jars and attachments in warm, soapywater with a soft cloth.
Usecaution whenwashing the blade assemblies as theblades are very sharp.
3.
Rinse and dry thoroughly.
4.
Jars, lids and blade assembly are all dishwasher safe.It is recommended that
the lids and blade assembly be placed on the top rack. Ensure that the blade
assembly are removed from the jars before placing in the dishwasher.
5.
Wipe the motor base clean with a damp cloth.
IMPORTANT: Make sure that the motor base is plugged before use.
1. Place the motor base on a clean, dry, level surface such as a counter or table
top.
2. Add ingredients to the jar.
3. Place the blade assembly onto the jar and turn it on tightly, until you have a
4
good seal. (Fig. 1).
4. Turn the jar upside down and place it onto the motor base, aligning the tabs
on the jar with the motor base. the unit is ready for use. (Fig. 3).
5. The jar in short intervals to activate. (Fig. 4).
6. The jar counterclockwise (Fig. 5) and pull straight up to remove. (Fig. 6).
7. Turn the jar upright and remove the Blade Assembly by twisting the blade
assembly counterclockwise. Be sure to store the Blade Assembly attached to an
empty jar when not in use.
5
8. Place the Sip & Seal lid onto the jar, twist to seal and enjoy!
9.Make sure that the motor base is unplugged when not in use.
11
BLENDER
TBL900210MD