Safety Information - Titan SteamMaster 0LMB150NA Manual Del Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USE
Thank you for purchasing a Titan steam wallpaper stripper.
In order to obtain the best results please read the instructions before commencing any
work. Please also make a special note of the safety information.
UNDER NO CIRCUMSTANCES SHOULD THIS PRODUCT BE USED FOR ANY PURPOSES OTHER
THAN THOSE DETAILED HEREIN AND TITAN TOOL WILL ACCEPT NO RESPONSIBILITY FOR
SUCH USE.
RETAIN FOR FUTURE REFERENCE

SAFETY INFORmATION

Keep away from children and animals.
Do not pull by the power cord or the steam
hose.
Be careful of overhead dripping, when
using on overhead areas tilt the steam plate
away from the face and body, and regularly
empty the steamplate of any collected
condensation.
Do not leave unattended.
Do not point the steamplate at anyone.
Do not allow water or steam to enter light
switches or sockets.
Always use and store upright. Always empty
unit after use.
Always visually check that the hose and
steamplate inlet are not blocked before
attempting to use.
Fully uncoil power cord and hose before
commencing use.
Do not strain, kink or trap the hose under
heavy objects.
Use only 4lbf pressure cap as supplied. It is
also a safety valve.
NEVER BLOCK OFF THIS OUTLET.
NEVER remove the filler cap when unit is
boiling - switch off and wait for 5 minutes.
Always disconnect power supply when filling
the machine or when not in use.
Do not use any caustic cleaners on the tank.
Do not allow to boil dry.
2
Do not overfill the reservoir. DO NOT USE
ADDITIVES.
Never detach the hose while the unit is
switched on.
The tank becomes hot in use. Do not touch.
Only move with the carrying frame.
Steam is produced at 212°F (100°C). Wear
protective
clothing
operating this stripper.
DO NOT USE THIS STRIPPER FOR ANY
PURPOSES OTHER THAN THOSE DETAILED IN
THESE INSTRUCTIONS
Under
no
circumstances
attempt to repair a unit unless qualified and
authorized to do so. Use only genuine Titan
replacement parts.
If unit is exposed to excessive heat, as in the
case of fire, it should be removed from service
and destroyed due to loss of structural
strength.
Before using, check all parts for proper
function and damage to component parts.
Do not use a damaged or improperly
functioning stand/frame.
Use a ground fault circuit interrupter (GFCI)
to protect yourself against electric shock.
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
SteamMaster
and
gloves
when
should
you

Publicidad

Tabla de contenido
loading

Tabla de contenido