Personal Safety - Work WG801E Manual Original

edges or moving parts.
Damaged or entangled
cords increase the risk of
electric shock.
e) When operating a
power tool outdoors,
use an extension cord
suitable for outdoor
use. Use of a cord
suitable for outdoor use
reduces the risk of electric
shock.
f) If operating a power
tool in a damp location
is unavoidable, use a
residual current device
(RCD) protected
supply. Use of an RCD
reduces the risk of electric
shock.

3. PERSONAL SAFETY

a) Stay alert, watch what
you are doing and use
common sense when
operating a power tool.
Do not use a power
tool while you are tired
or under the influence
of drugs, alcohol or
medication. A moment
of inattention while
operating power tools
may result in serious
personal injury.
b) Use personal
Cordless shrub shear /
grass shear / weeder
protective equipment.
Always wear eye
protection. Protective
equipment such as dust
mask, non-skid safety
shoes, hard hat, or
hearing protection used
for appropriate conditions
will reduce personal
injuries.
c) Prevent unintentional
starting. Ensure
the switch is in the
off-position before
connecting to power
source and/or battery
pack, picking up or
carrying the tool.
Carrying power tools with
your finger on the switch
or energising power tools
that have the switch on
invites accidents.
d) Remove any adjusting
key or wrench before
turning the power tool
on. A wrench or a key left
attached to a rotating part
of the power tool may
result in personal injury.
e) Do not overreach.
Keep proper footing
and balance at all
times. This enables
better control of the
power tool in unexpected
9
EN