Models; Package Content; Safety Warnings; Intended Use - ekwb EK-Loop Manual

MODELS

- EK-Loop Heat Gun 2000W - EU Plug
- EK-Loop Heat Gun 2000W - UK Plug
- EK-Loop Heat Gun 1500W - US Plug

PACKAGE CONTENT

Check the heat gun, the power cord and the power plug for transportation damages.
WARNING: Packing materials are not toys! Children must not play with plastic bags!
Danger of suffocation!
• Heat gun (1 piece)
• Instruction manual (1 piece)
When parts are missing or damaged, please contact your dealer.

SAFETY WARNINGS

Read, understand and follow all safety rules and operating instructions in this manual before
using this product.
Accordance to International Standard EN 60335-1
• This heat gun is intended for domestic use only and not for commercial applications.
• This heat gun cannot be used by children or persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge.
• Children shall not play with the heat gun.
• Cleaning and user maintenance shall not be made by children.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
• A fire may result if the heat gun is not used with care, therefore:
• be careful when using the heat gun in places where there are combustible materials;
• be aware that heat may be conducted to combustible materials that are out of sight;
• do not use in presence of an explosive atmosphere;
• do not apply to the same place for a long time;
• do not leave the heat gun unattended when it is switched on;
• place the heat gun on its stand after use and allow it to cool down before storage.

INTENDED USE

Your heat gun has been specially designed tool for bending acrylic and PETG tubing only.
The heat gun has two settings:
1. Low heat (position 1): for use where the work surface or surrounding must not be allowed
to get too hot.
2. High heat (position 2): for faster heat up time of the work surface where you can also
operate the gun at a greater distance.
- 3 -