Tabla de contenido
Publicidad
m-certa-plus-es-02
1
Declaración de conformidad
EC/EU Declaration of Conformity (English translation)
1.
Manufacturer:
Watson Marlow GmbH, Steinbeisstr. 3, 74360 Ilsfeld (Germany),
Phone: +49(0)70629560-0
2.
Name and address of the authorised documentation officer:
Watson Marlow GmbH, Steinbeisstr. 3, 74360 Ilsfeld (Germany)
Product
3.
Type designation
4.
The above-mentioned manufacturer declares on his own responsibility that the product /
machine conforms to all regulations of this EC directive:
2006/42/EG
The above-mentioned manufacturer further declares that the product / machine is in conformity
with the following additional EC/EU directives or relevant regulations:
2014/30/EU
Directive 2014/35/EU was complied with in accordance with Annex I No. 1.5.1 MRL
2006/42/EC with regard to its protection objectives.
According to Directive 2014/68/EU, Artikel 4.3 the above mentioned manufacturer certifies in
"accordance with the applicable good engineering practice" that the design and manufacture
ensures that the pump can be used safely according to the operating data on the nameplate
and in the instruction manual.
5.
The following harmonised standards - or parts thereof - have been applied:
EN ISO 12100: 2011-03
EN ISO 13857: 2008
EN 809: 1998+A1:2009 +
AC:2010
The following other technical standards/specifications - or parts thereof - were applied:
DIN EN 10357:2014-03 Longitudinally welded stainless steel tubes for the food and chemical
DIN 11851 Dairy pipe fittings
DIN 11864 Aseptic tube shipments
Ilsfled, 01.01.2021
Ort, Datum
Rev. 01 / 01.01.2021
for the purposes of Directive 2006/42/EC Annex II 1.A
: MasoSine Pump
: Certa, Certa Plus, SPS
Directive 2006/42/EC of the European Parliament and of the
Council of 17 May 2006 on machinery and amending Directive
95/16/EC (recast) (1 ) Official Journal of the EU: L 157/24 of
09.06.2006
Directive 2014/30/EU of the European Parliament and of the
Council of 26 February 2014 on the harmonisation of the laws of
the Member States relating to electromagnetic compatibility
(recast), Official Journal of the EU: L 96/79 of 29.03.2014
Safety of machinery - General principles for design - Risk
assessment and risk reduction
Safety distances against reaching of hazardous areas
Pumps and pump units for liquids - General safety requirements
industry
Ewald Warmuth (Managing Director)
3
Publicidad
Tabla de contenido
