Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTION MANUAL
HAIR DRYER
DEAR COSTUMER
Thank you four purchase!
Please read carefully this manual and keep for your future reference.
If you need additional support please write to: info@premiermundo.com
SE-2370IC
RATED PARAMETERS
Voltage:
120V~
Frequency:
60Hz
Power:
1800W
HOW TO USE YOUR HAIR DRYER
1. Always ensure the switch is set to "0" position before plugging the unit the power outlet.
2. Use the high setting for drying hair, and use low setting for styling.
3. Should the hair dryer stop for any reason, turn it off at once and let it cool down.
4. Adjust the desired blowing strength:
Position 0: OFF
•
Position 1: Half power, medium temperature for gentle drying and styling
•
Position 2: Full power, high temperature for quick drying
•
COOL SHOT
With this switch it is possible to interrupt the heating process so that the air can be mixed according to
individual requirements.
IONIC
This appliance is supplied with the device IONIC Technology, which emits negative ions during the
drying. It can help to eliminate the electrostatic loads from the hair, to get soft style result
MAINTENANCE
This hair dryer maintenance is free, no consumption or lubrication is needed.
•
Keep this appliance clean for proper operating.
•
Never block or clog air intakes, otherwise overheated will be happen.
•
The appliance has no user serviceable parts; any other servicing should be performed by an
•
authorized service representative or a professional center.
Never allow the supply cord to be twisted, pulled, bent, or wrapped around the dryer.
•
If the cord is twisted, to untwist the cord before use.
•
When not in use, this appliance should be stored in a safe, dry location, out of reach of children.
•
CLEANING AND CARE
Always ensure that hair dryer is disconnected from the mains supply before cleaning.
•
Use a damp cloth for cleaning and wipe dry. This will help preserve the original finish of your hair
•
dryer.
Abrasive cleaners should not be used.
•
NOTE
Never immerse the hair dryer in water and always ensure that plug is kept dry.
•
Frequently clean out any hair or fluff that becomes stuck in the inlet filter.
•
To clean the filter, vacuum or dry brunch clean, never immerse the filter in water. Failure to
•
keep filter clean may result in overheating.
Pagina 1
Publicidad
