Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Features
- Power supplied :12V DC.
- Transmission signal: 1 Vpp composite video.
- 3 pins green terminal block: 2 pins for power supply, 1 pin for grounding.
- Transmission distance up to 1200 m working with active transmitters (Ref. 430 606).
- Transmission distance up to 600 m working with passive transmitters (Ref. 430 605).
- Compatible with worldwide video formats including PAL, NTSC, SECAM.
- Higher standard built-in surge & transient protection.
- Super interference rejection.
Panels diagrams
NO.
Component
1
Adjustment
Switches
2
Signal LED
3
Power LED
4
Power Supply
Input
Installation procedure
1.
Connect cameras with video transmitter via BNC cable;
2.
Connect DVR with 4CH active video receiver via BNC cable;
3.
Connect transmitter and receiver via UTP cable (RJ45 or green terminal to be choosed);
4.
Connect the receiver with power supply (12-40V AC);
5.
Connect the receiver with ground via grounding knob;
6.
Power on camera, DVR, monitor, etc;
7.
Make adjustment according to real distance for best image.
1
4
5
6
7
Description
4 switches for each channel, please
refer to adjustment diagram
Indicates if signal is normal
Indicates if power supply is normal
12VDC input
2
3
8
NO.
Component
5
Grounding
6
Rj45
7
8 pin green
terminal block
8
BNC-F
Description
The device should be
grounded while working
EIA/TIA568A or EIA/
TIA568B
to connect UTP cable
directly
Dual video output
Publicidad
Tabla de contenido
