Getting Started; Welcome Screen; Changing Channels - Crypto ReDi 270 Manual De Usuario

All manuals and user guides at all-guides.com

5. GETTING STARTED

5.1 Welcome Screen

If you use ReDi 270 for the first time, the "Welcome" menu appears.
Press cursor button to to select your country and press "OK" button to start channel
search.
The device will search for all available channels and it will store them. After searching
finishes, press OK to start viewing the channels.
6. OPERATION

6.1 Changing Channels

There are three ways of channel selection - stepping through the channel list,
selection by number and from the on-screen channel list.
1. Stepping through the channel list:
To move through the channel list, press the upward arrow or downward arrow key on
the remote control.
2. Selected by number:
Enter the channel number directly by pressing numeric buttons, and press the "OK"
button to select desired channel.
3. Selected by on-screen channels list:
You can also select the required channel directly from on-screen channel list. This is
displayed using the device main menu. See "Edit Channel" in this manual for
operation details.
6.2 Accessing the Electronic Program Guide (EPG)
Accessing the EPG of all channels:
1 Press "EPG" button to enter EPG menu .
2. Press cursor button to switch between channel list, events
schedule of the selected channel and now/next events.
3. Press "Green" button to Timer the events.
4. Press "Red" button to display " Time Bar" menu.
7. Installation
1. Press the "MENU" button to enter main menu.
2. Press "UP"or " DOWN " button to highlight "Installation", press "RIGHT" button to
enter to the Installation menu.
3. Press "UP" or "DOWN" cursor button to highlight the desired item and press "OK"
button to enter the sub-menu .4. Press "EXIT" button to exit.
7.1 Auto Search
Here you can search and store channels automatically.
7.2 Manual Search
Here you can search manually a channel and store it to a specific channel number.
www.cryptoelectronics.com