Packard Bell Medi@ TV Manual De Instrucciones página 6

a. From the Welcome screen, select the language of your choice.
b. Select the type of network that you are going to use. If you have purchased the Packard Bell net2plug
edition, then please select Wired. For other types of network, please refer to the electronic User's
Guide.
The following steps assume that you have selected Wired.
c. Select Automatic (DHCP) in the assignment method window.
d. Restart Medi@ TV to activate the new network settings. Please click on OK to do so.
On the television screen:
• Select Cancel.
• From the home page, select Network and then confirm that you want to change your network
settings.
• Select Wired.
• Enter the following IP settings:
6
All manuals and user guides at all-guides.com
IV. Configuring your Medi@ TV
If after five minutes the Medi@ TV cannot connect to the network:
IP Address: 192.168.37.11 - Subnet Mask: 255.255.255.0