Descargar Imprimir esta página

BEMIS 1000SC2 Instrucciones De Montaje

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

DIRECTIONS FOR USE
(Single Canister/Liner Only)
Note: If more than one canister/liner is needed, a manifold must be used.
Use manifold model number 538410.
1.
Stopcock canister may be used on a single wall plate, regulator mounted or on a
four-canister stand.
2.
If used on a non-Bemis single wall plate, place adapting wire hanger (Model 539010)
into wall plate and slide stopcock canister into it.
3.
If the stopcock canister needs to be regulator mounted, utilize the adapting regulator
bracket (Model 538510). Note: Bemis does not recommend placing a 3000cc canister
on a regulator.
4.
Make sure stopcock is in OFF position. (Figure 3)
5.
Attach vacuum tube from regulator or vacuum outlet to stopcock canister tubing
barb underneath stopcock. (Figure 1)
6.
Insert liner into reusable canister. Press lid firmly around perimeter.
7.
Connect white vacuum hose to vacuum port of liner.
8.
Attach patient tube to patient port and cap all other unused ports.
9.
Turn vacuum on, then turn stopcock to ON position. Liner
should now be inflated. Note: Stopcock is ON when vertical
(Figure 2) and OFF when horizontal (Figure 3).
10. Before disconnecting vacuum at end of procedure, remove
patient port tube and cap all ports tightly. Turn off stopcock;
remove white vacuum hose and cap vacuum port.
11. Carefully remove and dispose of liner according to hospital
policy; clean and disinfect reusable outer canister immediately
after use.
Note: When using a tandem setup, dispose of all used and unused
liners after the procedure.
CAUTION
• Liner is single use only. Outer canister is reusable.
• Always use matching size liner and outer canister. Do not attempt to use a 1000cc liner in a 3000cc canister.
• Not recommended for use with portable vacuum systems as reduced airflow may result.
• Clean outer canister with 10% bleach or 10% alcohol solution. Do not use acetone-based cleaners.
• Do not exceed vacuum level of 25" (640mm) Hg.
• Do not apply continuous vacuum longer than 24 hours.
• Not intended as a measuring device, only for general reference, not specific measurement.
• Store in a dark place. Long term exposure to light may compromise product performance and result in
breakage during use.
• Check expiration date on top of liner lid for use-by date.
Report any product malfunctions or complaints to Bemis Manufacturing Co. using the contact information below.
Distributed By: Bemis de México, Av. Texas 200, Parque Industrial Nacional, Ciénega de Flores, N.L. 65550, Mexico • 81-81545500 • FAX 81-83197884
Bemis Chile, Nueva Costanera 4229, Oficina 205, Santiago Chile • 800-2-23647 • FAX 56-2-2064697
Manufactured by: Bemis Manufacturing Company • 300 Mill Street, Sheboygan Falls, WI 53085 • 920-467-4621 • 800-558-7651 • FAX 920-467-8573
Contains or presence of phthalate
See brochure for complete line of canisters, hardware and accessories.
e-mail latinamerica@bemismfg.com • www.bemisdemexico.com
CONFORMS TO ISO10079-3:2014
Reusable Stopcock Canister
For use with:
1004R 1000cc Suction Liner
On
(Figure 2)
Model 1000SC2
Tubing
Barb
(Figure 1)
Off
(Figure 3)
7/2021 Rev. 2.0
©2021 5990312 002

Publicidad

loading

Resumen de contenidos para BEMIS 1000SC2

  • Página 1 See brochure for complete line of canisters, hardware and accessories. Distributed By: Bemis de México, Av. Texas 200, Parque Industrial Nacional, Ciénega de Flores, N.L. 65550, Mexico • 81-81545500 • FAX 81-83197884 Bemis Chile, Nueva Costanera 4229, Oficina 205, Santiago Chile • 800-2-23647 • FAX 56-2-2064697 Manufactured by: Bemis Manufacturing Company •...
  • Página 2 Vea el folleto para conocer la línea completa de canisters y material de instalación y accesorios. Distributed By: Bemis de México, Av. Texas 200, Parque Industrial Nacional, Ciénega de Flores, N.L. 65550, Mexico • 81-81545500 • FAX 81-83197884 Bemis Chile, Nueva Costanera 4229, Oficina 205, Santiago Chile • 800-2-23647 • FAX 56-2-2064697 Manufactured by: Bemis Manufacturing Company •...