General Safety Warnings; Work Area; Personal Safety - stayer MULTI GAS CUTTER B Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Don't use the trimmer in any position that
causes any part to come within 10m of overhead
electrical line.
Keep hands away from blades, Don't touch the
blades when starting or while operating the unit.
Keep a minimum distance of 15m between the
machine and third parties during use.
Extremely hot surface. Do not touch a hot muffler,
gear box or cylinder. You may get burned. These
parts get extremely hot from operation and
remain hot a short time after the unit is turned off.

GENERAL SAFETY WARNINGS

5.
Read all safety warnings and all instructions.
Failure to follow all warnings and instructions
may result in electric shock, fire and/or serious
injury. Save all warnings and instructions for future
reference.

5.1 Work area

- Keep work area clean and well lit. Cluttered and dark
areas invite accidents.
- Do not operate tools in explosive atmospheres, such
as in the presence of flammable liquids, gases or dust.
Tools create sparks which may ignite the dust or fumes.
- Keep children and bystanders away while operating a
tool. Distractions can cause you to lose control.

5.2 Personal safety

- Stay alert, watch what you are doing and use common
sense when operating a tool. Do not use a tool while
you are tired or under the influence of drugs, alcohol
or medication. A moment of inattention while operating
tools may result in serious personal injury.
- Use safety equipment. Always wear eye protection.
Safety equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used whenever
conditions require will reduce personal injuries.
- Avoid accidental starting. Ensure the switch is in the
off position before plugging in. Carrying tools with your
finger on the switch or plugging in tools that have the
switch on invites accidents.
- Remove any adjusting key or wrench before turning the
tool on. A wrench or a key left attached to a rotating part
of the tool may result in personal injury.
- Do not overreach. Keep proper footing and balance
at all times. This enables better control of the tool in
unexpected situations.
- Dress properly. Do not wear loose clothing or jewelry.
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewelry or long hair can be caught
in moving parts.
- If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of these devices can
reduce dust related hazards.
ENGLISH
35
5.3 Engine tool use and care
- Use the correct tool for your application. The correct tool
will do the job better and safer at the rate for which it
was designed.
- Store idle tools out of the reach of children and do not
allow persons unfamiliar with the tool or
instructions to operate the tool. The tools are
dangerous in the hands of untrained users.
- Maintain tools. Check for misalignment or sticking of
moving parts, breakage of parts and any other condition
that may affect the tool's operation. If
the tool repaired before use. Many
caused by poorly maintained tools.
- Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to
stick and are easier to control.
- Use the tool, accessories and tool bits etc., in accordance
with these instructions and in the manner intended
for the particular type of tool, taking into account the
working conditions and the work to be performed. Use
of the tool for operations different from intended could
lead to a hazardous situation.
5.4 Service
- Have your tool serviced by a qualified person using only
identical replacement parts. This will ensure that the
safety of the tool is maintained.
ADDITIONAL SAFETY INSTRUCTIONS FOR
6.
PETROL HEDGE TRIMMERS
- Do not operate in a hazardous location. Such areas
include where there is a risk of explosion of petrol fumes,
leaking gas or explosive dust.
- Do not operate in a confined area. Exhaust gases,
smoke or fumes could reach dangerous concentrations.
- Protect your tool. This hedge trimmer is NOT
WEATHERPROOF and should not be exposed to direct
sunlight, high ambient temperature and damp, wet or
high humidity conditions.
- Do not smoke while refueling. This is potentially
dangerous as it may ignite the fuel and cause an
explosion.
- Take care not to spill fuel. When refueling the hedge
trimmer ensure that the motor has been switched off.
Prevent the spilling of fuel as this may also ignite with
the hot motor. Never refuel whilst the engine running.
- Be careful where you store the hedge trimmer. Store
the hedge trimmer in a dry area away from flammable
liquids.
- Keep your distance. The hedge trimmer emits exhaust
fumes. Ensure bystanders keep a safe distance.
- Ensure you use oil-mix fuel. Ensure that you mix 25 parts
unleaded fuel to 1 part 2-stroke oil. If not, the engine will
overheat and cause damage to your hedge trimmer.
35
es
it
gb
gr
these
damaged, have
accidents are

Publicidad

Tabla de contenido
loading

Tabla de contenido