Brandson Equipment 305694 Manual De Instrucciones página 11

4. Clearing the memory (recommended each time before reprogramming)
1. Press the A and B buttons simultaneously until the LED flashes three times.
2. Release the B button (press and hold the A button), and press the B button
three times. The LED flashes rapidly.
3. Release both the buttons. The garage door opener is ready for copying.
5. Duplication
When duplicating, place the duplicator as close as possible to the desired original
transmitter (a little to the side, pos. 1 or pos. 2 or pos. 3) if there are problems
with the connection.
Pos.1
Symbolic image
6. Duplicating the individual buttons
Alternative A: Press and hold the desired button of the garage door opener to
which you want to copy the signal. Then quickly press the button of the original
transmitter. The status led flashes briefly. Please press and hold the button until
the LED of the garage door opener flashes twice. This means that the duplication
was successful.
English
Pos.2
Pos.3
11