Costco Garden Arbor Instrucciones De Montaje

IMPORTANT, RETAIN FOR FUTURE REFERENCE:
If you have any questions or comments in the U.S. and Canada, or if there are missing or broken parts, please call Customer Service at
1-800-828-9316 (English only) from 9 a.m. – 4 p.m. EST, Monday – Friday (U.S. and Canada Only). If you prefer, or are not within the U.S.
or Canada, please send a letter to: MercAsia USA, Ltd. 1501 Gary St. Bethlehem, Pennsylvania 18018 or e-mail
(English, French & Spanish). If any parts are broken or lost during use, you can also order replacements through the above contact information.
PARTS LIST:
(A)
Middle Section of Arch
1
(E)
Screw
24 + 2 spare
ASSEMBLY INSTRUCTIONS:
Before starting assembly, choose a level location where you want to place the arbor. Assemble the arbor in this location.
Lay all parts on a flat, non-abrasive surface.
Step 1
Insert the bolts of Middle Section
of Arch (A) into the holes of
Right and Left Sections of Arch
(B) by corresponding labels. Use
Allen Key (F) to tighten Screws
(E) so both sections are secure.
See Figure 1.
Step 3
Insert the bolts of Top Section of
Side Panel (C) into the holes of
Bottom Section of Side Panel (D)
by corresponding labels. Use
Allen Key (F) to tighten Screws
(E) so both sections are secure.
See Figure 3.
Garden Arbor
ITM. / ART. 2127191
READ CAREFULLY
(B)
Right and Left Sections of Arch
2
(F)
Allen Key
1
Step 2
Insert the bolts of Right and Left
Sections of Arch (B) into the
holes of Top Section of Side
Panel (C) by corresponding
labels. Use Allen Key (F) to
tighten Screws (E) so both
sections are secure. See Figure 2.
Step 4
Insert Stakes (G) to the Base, see
Figure 4. Use of the stakes to
secure the base is strongly
recommended on soft ground as
soil ground surfaces often do not
provide a level surface.
(C)
Top Section of Side Panel
2
(G)
Ground Stake
8
Figure 1
(A1/B1)
Figure 2
(B1/C1)
Figure 3
(C1/D1)
Figure 4
service@mercasia.com
(D)
Bottom Section of Side Panel
2
Figure 1
(A2/B2)
Figure 2
(B2/C2)
Figure 3
(C2/D2)
Figure 4