Draining The Water - Airalia AIR-DH20 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

EN
DE
SP
FR
IT
Q - Full Water Tank Indicator: Indicates when the dehumidifier water tank is full, removed or incorrectly
slotted.
R - Power Supply Indicator: Indicates when the dehumidifier is switched on.
S - Display Screen: Shows information related to the dehumidifier operation (target relative humidity %,
current room relative humidity %, timer settings, room temperature).
Child Lock: The dehumidifier controls can be locked for child safety. Press and hold the Timer Control
button for 5 seconds to lock and unlock the control panel.
Humidity Indicator Light: Indicates the current relative humidity percentage with three different colours:
Humidity
Indicator Light
Red Light
The current relative humidity is above 70%.
Green Light
The current relative humidity is between 50%-70%.
Blue Light
The current relative humidity is below 50%.

Draining the water

Draining the water collected in the water tank
The dehumidifier condensate water is collected directly in the water tank.
When the water tank is full, the dehumidifier automatically stops, and the "Full Water
Tank" indicator (Q) lights up on the control panel accompanied by a beeping sound.
Follow the steps below to empty the water tank:
Step 1: Turn off the dehumidifier by pressing the Power Button (A).
Step 2: Locate the water tank at the back of the dehumidifier and gently pull the water
tank out.
10
20L Dehumidifier | Model AIR-DH20
Step 3: Use the water tank handle to empty it into a sink or bathtub.
Step 4: Slot the empty water tank back into the dehumidifier making sure it is properly
positioned. Any misalignment of the tank will prevent the dehumidifier from starting to
run again and the "Full Water Tank" indicator will carry on lighting.
Do not remove the foam float located inside the water tank. It is used by the
dehumidifier to automatically stop dehumidification when the water tank is full.
Handle
Dehumidifier Back
Continuous external water drainage
It is recommended to use the continuous drainage function when the appliance is used
for long periods and the water tank cannot be emptied regularly. Follow the steps below
to use this function:
Step 1: Turn off the dehumidifier by pressing the Power Button (A).
Step 2: Locate the water tank at the back of the dehumidifier and gently pull it out.
Step 3: Locate the continuous water drain outlet at the back of the dehumidifier.
Step 4: Insert the hose into the continuous water drain outlet and make sure it is
attached correctly.
EN
DE
SP
FR
IT
Water Tank
20L Dehumidifier | Model AIR-DH20
11

Publicidad

Tabla de contenido
loading

Tabla de contenido