Sharp DR-P420 Manual Del Usuario página 14

14
will automatically be selected when you power the
radio back on.
Tune to an FM station
Long press or
frequency band. The radio will search for and stop at
the next available station.
Short press or
0.05MHz steps.
Note: If the reception is poor, adjust the aerial or
move the radio to another location.
Change the scan setting
In FM mode:
, <Scan setting> will be displayed.
Long press
Press .
There are two different options to choose from:
• <Strong stations> The scan will only stop when a
strong signal strength is received, resulting in bet-
ter audio quality. It is possible that the station you
are scanning for may be missed using this option.
button to scan up or down the
to fine-tune each frequency in
• <All stations> The scan will stop at every station it
receives, even if the signal strength is poor.
Use to choose and select from the options
available.
Note: The current scan setting will have an asterisk (*)
in the display.
Storing an FM station preset
Your radio can store up to 20 FM stations in its preset
memories for instant access to your favourite stations.
Note: Storing FM radio station presets do not
overwrite your DAB station presets.
Tune the radio to the FM radio station that you wish
to preset. Long press
<1:(Empty)>> is displayed. Use
to and select the preset location that you would like
to store the radio station to (1-20). The display will
confirm <Preset X stored>, where 'X' is the number
of the preset (1-20).
Note: If there is already an existing FM station stored
under a preset, it will be overwritten when you store
until <Preset Store
to move