Switching Off And Transportation - HAEGER Acurio 65 Manual De Instrucciones

5. Now switch the appliance on, without the accessories and without
foodstuffs. Leave the appliance door completely open.
6. Select the setting 230° C with the temperature control switch. Place the
main function switch to upper and lower heat.
7. Place the timer switch at 15 minutes.
The appliance allows itself to be switched on with the timer switch. As
soon as the time switch is set the control lamp glows.
As the heating elements are lightly greased, a slight smell may occur
when first putting them into operation. This is harmless and stops after
a short time. Open a window and provide for sufficient ventilation.
8. When the appliance has switched itself off automatically, place the main
function switch to OFF.
9. Remove the plug from the power socket and wait until the appliance has
cooled itself down.
10. Then clean the grill and baking area with a cloth lightly moistened with
water and then dry it carefully.

Switching off and transportation

Switching off
Set the main function switch (heating selector) and the timer switch to OFF
•
position. Unplug the power plug from the socket.
Transporting
If you wish to transport the oven to a different location, first allow it to cool
•
down.
Remove the power cord from the socket.
•
Wind the power cord around the bracing hooks at the back of the
•
appliance.
Operation
Grilling and baking
1. Remove the roasting grill and baking tray from the appliance. If required,
cover these with baking paper resp. smear the baking tray with butter or oil.
2. Allow the appliance to heat up for ca. 10 minutes (dependant on the
setting) to the required temperature:
- Select the required temperature with the temperature control knob.
Instructions Manual
English
5