Package Contents - Montarbo FLYBAR WINDPRO 212 Manual De Uso

FLYBAR WINDPRO 212/215
Thank you for purchasing a product created by Montarbo, an Italian company founded in
1962, always at the service of music and professional audio. Montarbo products, original
and avant-garde, are designed with the utmost attention to detail and durability. Reliability is
in line with the high quality standards and sensitivity to environmental impact that distinguish
the company.
Safety information
The Flybar WIND PRO 212/215 must only be used by expert personnel.
To prevent hazards to people, animals and/or objects, make sure that the
installation is stable and secure. Comply with the safety regulations and laws
in force in the country in which you use the product. To ensure safe use of the
accessory, periodically check that all parts are in good working condition before
use. Only authorised personnel may carry out design, calculations, installation,
testing and maintenance of professional flown or stacked audio systems. AEB
Industriale shall not be liable for improper installation without adequate safety
measures.
OVERVIEW
1
The Flybar WIND PRO 212/215 is designed for the suspended installation of Montarbo
WIND PRO 212 and WIND PRO 215 speakers.
A. Lifting bracket lock pin
B. Adjustable lifting bracket
C. Shackle (lifting point)
D. Speaker fixing cams
E. Speaker lock pins

PACKAGE CONTENTS

2
1 x Flybar
1 x Adjustable lifting bracket
1 x Shackle
2 x Lifting bracket lock pins
4 x Speaker lock pins
1 x User manual - Section 1
1 x User manual - Section 2
6
B C
A
D
E
INSTALLATION
3
The flybar has two cams for each rigging point to allow suspension of both the WIND PRO
212 and WIND PRO 215 speakers. The label on the flybar clearly shows which cam is to be
used for each speaker model.
Remove the four lock pins to release the cams of the flybar.
User manual
WIND PRO 212
WIND PRO 215
7