Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 28

BEFORE THE FIRST USE

·
Make sure all packaging materials and promotional stickers have been removed before using the
appliance for the first time.
·
Before using the device, clean it with a moist cloth.
USE
1.
Ensure the soup maker is unplugged before adding the ingredients.
2.
Remove the cover. Turn it counter-clockwise and lift it up.
3.
Place all the ingredients in the soup maker.
4.
Add the water or broth last, filling it up to between the min and max indication lines. Make sure that
the appliance is always filled between the minimum (0,6 l) and maximum (1,2 l) indicators. Make
sure there is enough liquid so that the starch in the ingredients cannot burn. Take into account a
ratio of 40% vegetables to 60% moisture.
! When making vegetable milk, the jug should only be filled to 0.8 litres.
5.
Place the lid on the housing and tighten it into place. Ensure it is securely in place.
6.
Plug the cable in the power socket at the bottom of the handle. The indicator lights will blink one
by one. If this is not the case and you see dashes on the display, this means that the lid has not been
placed correctly.
7.
Select the required program (juice, jam, extra smooth, soy/nut milk, smooth, chunky, blend/clean)
by pressing the setting button 'MODE'. The indicator light for the selected programme lights up.
Then press the 'START/STOP' button. The indicator light for the selected programme will remain lit
and the time on the display will count down.
8.
When the programme has finished, you will hear a signal 10 times. The indicator light of the
completed programme will remain lit for 1 minute, after which the appliance will automatically
return to the standby mode. Be careful when you pour out the soup!
If you want to turn the appliance off during the programme or want to change the programme, press
and hold the on/off button for a few seconds.
1
5
www.domo-elektro.be
2
6
3
7
4
8
DO727BL
25

Publicidad

Tabla de contenido
loading

Tabla de contenido