Setting Up The Head Parameters - ComAp Q341001001 Manual Del Usuario

VII.

SETTING UP THE HEAD PARAMETERS

Head key functions:
Enter key: press to confirm.
Esc key: press to go back.
Up and Down arrows: to browse through the water softener menus.
IMPORTANT: If no key is pressed for a few minutes, the screen is disabled. To reactivate
the screen, press the
1- Setting the clock:
Press to access the menu.
Use the and keys to select "Set Clock".
Press to access the menu.
Set the time, using the
Press to confirm.
Press to quit the menu.
2- Setting the recharge time:
Note: By default, the recharge time is set to 2 am (time at which there is no water consumption).
However, the recharge time can be changed as follows:
Press to access the menu.
Use the and keys to select "Advanced Settings".
Press to access the menu.
Use the and keys to select "Set Recharge Time".
Press to access the menu.
Use the and keys to set the recharge time.
and keys together, for 5 seconds.
and keys.
25