Safety Instructions - VONROC PS505 Serie Traducción Del Manual Original

EN

1. SAFETY INSTRUCTIONS

Model no.
Operating pressure
Size spray nozzle
Max. spray range
Area coverage
DESCRIPTION
The numbers in the text refer to the diagrams on
page 2-3.
1. Deflector shield
2. Diffuser pin
3. Collar clamps
4. Trip pin
5. Water supply connection
6. Multiple connection
2. OPERATION
The text will refer to the diagrams A to E on page 2.
• Adjusting the deflector shield(1) will set the
spray distance. Raising the deflector shield
completely will result in the maximum spray
distance. Lowering the deflector shield into the
water spray will reduce the spray distance.
• The diffuser pin(2) can diffuse the water jet.
Screw the pin in a clockwise direction so the
pin will disrupt the water jet. This will create a
shower-like spray pattern. For a more con-
centrated water jet which will spray further,
unscrew the pin all the way.
• The sprinkler head will move between the two
collar clamps(3). Adjusting the clamps will set
the spray area coverage.
• Flip the trip pin(4) to the up position for a full
360° coverage.
• Connect the water supply connection(5). To
connect multiple units(6) use an extra water tap
connector ¾"and attach an additional hose and
sprinkler.
Points of attention.
• Pulse sprinklers require a minimum water pres-
sure of 2 bar. Without adequate pressure, the
sprinkler head will not rotate properly.
4
PS505XX
Minimum 2.0 bar
Maximum 6.0 bar
4.0 mm
≤ Ø 24 m, 450 m²
0° - 360°
• Additional units will reduce the maximum cov-
erage area of all sprinklers!
• Coverage area may vary depending on local
water pressure and water flow rate.
• Hose length and hose diameter will affect water
pressure and flow rate.
WARRANTY
VONROC products are developed to the highest
quality standards and are guaranteed free of
defects in both materials and workmanship for the
period lawfully stipulated starting from the date of
original purchase. Should the product develop any
failure during this period due to defective material
and/or workmanship then contact VONROC directly.
The following circumstances are excluded from this
guarantee:
• Repairs and or alterations have been made
or attempted to the machine by unauthorized
service centers;
• Normal wear and tear;
• The tool has been abused, misused or
improperly maintained;
• Non-original spare parts have been used.
This constitutes the sole warranty made by compa-
ny either expressed or implied. There are no other
warranties expressed or implied which extend
beyond the face hereof, herein, including the im-
plied warranties of merchantability and fitness for
a particular purpose. In no event shall VONROC be
liable for any incidental or consequential damages.
The dealers remedies shall be limited to repair or
replacement of nonconforming units or parts.
The product and the user manual are subject to
change. Specifications can be changed without
further notice.
WWW.VONROC.COM