Software Installation - Velleman DVBTUSB2 Manual Del Usuario

5. Software installation

• Prior to connecting the receiver to the PC, all necessary drivers and software must be installed.
• Insert the included CDROM into the CDROM drive. When auto run is enabled, the CD menu screen
is displayed. If not, locate the application autorun.exe on the CDROM and click on it.
• Select Drivers and follow the instructions on the screen.
• When driver installation is finished, select BlazeDTV and follow the instructions on the screen. The
registration code is printed on the CDROM cover.
Note: ignore the Windows logo testing message and click 'continue anyway'.
• When the installation is finished, open the BlazeDTV software by double clicking on the desktop
icon.
• Three screens are shown:
o a main screen that plays back the selected channel
o an EPG (electronic Program Guide) screen that shows all available channels
29/09/2010
DVBTUSB2
3 ©Velleman nv