Polar GE632 Manual De Instrucciones página 7

Warning:
• Make sure that all fittings in system
are tight. Always keep the CO
in vertical position. The recommended
pressure for the CO
• Always handle the CO
care. Never lay flat or drop!
• Handle all pressure system components
with care. Do not use excessive
pressures. Be sure instructions are
understood thoroughly. If in doubt,
contact your dealer/distributor for
explanation.
• Filled CO cylinders are potentially
2
dangerous because of the pressure they
contain. If you are unfamiliar with their
use or the use of the CO
information from your local distributor,
or your local beverage man before
proceeding.
When necessary to connect
a remote CO
below diagram for reference.
For actual connections, ensure
to follow the manufacturer's
instructions supplied with the
CO cylinder.
2
GE632-GE633_ML_A5_v1_20210423.indb 7 GE632-GE633_ML_A5_v1_20210423.indb 7
Beer keg layout: Model GE632
cylinder
2
system is 8-10 psi.
2
cylinder with
2
regulator, seek
2
cylinder, use
2
Beer keg layout: Model GE633
UK
7
2021/4/23 13:26 2021/4/23 13:26