Cleaning And Maintenance - Volpi KVS8000P Manual Del Usuario

Therefore, first of all make a lightening cut (1) on the pressure side (A), then a cross-cutting cut (2) on
the pulling side (B).
• Always keep the chainsaw at full speed.
• Do not cut using the end of the bar.
• Constantly check that the lubrication is working correctly.
• While moving the chainsaw from one branch to another, release the trigger to stop the chain.
• Keep passers-by and other people at a minimum distance of 1.5m.
• Do not use the tool in the rain or in humid environments.
• After use, remove the battery from the chainsaw.
• If left unused for 10 minutes, the chainsaw switches off automatically.
Warning: in case of difficult cut, check the battery charge and the correct sharpening and
tension of the chain.

15. Cleaning and maintenance

Tools to be repaired should be brought to the service center. The use of original parts will
ensure the correct and safe operation of the tool.
Disconnect the battery from the tool before checking, doing maintainance, repairing or cleaning the
tool to avoid the danger of accidental tool activation.
44