CHECK THE CONTENTS
•
ZZSNOWJET
•
1 x power cord
•
1 x User manual
•
1 x Fluid Reservoir Supply Hose
•
1 x 20 liter fluid reservoir
•
1 x 10 meter air hose
SETTING UP
•
Place the machine on a flat surface and in a suitably large area with at least 50 cm
open space around the machine.
•
Fill the fluid tank with ZZIPP approved fluid.
•
Connect the machine to a suitably rated power supply. To determine the power
requirement for the machine refer to the label on the back of the machine.
•
Always connect the machine to a protected circuit and ensure it is properly
grounded.
•
Turn on the machine, press the [SNOW]/[DOWN] button on the control panel to start
making snow.
•
To turn off the machine, press the [STOP] button and put the power switch to the
OFF position.
OPERATION
The machine can be operated with onboard digital control interface
Button
[MENU]
[UP][TIMER]
[DOWN][SNOW]
[ENTER][STOP]
Scroll through setting menu
Up/Activate Timer function
Down/Activate Volume function
Deactivate Timer/Snow function, Escape from menu
Function
3