Safety Warnings; Features - Surtek CSS02 Manual De Usuario Y Garantía

SAFETY WARNINGS

The Solar-
Powered Au-
t o - D a r k e n i n g
Welding Helmet
is suitable for
most welding
a p p l i c a t i o n s .
This helmet's
1/15,000-second
switch time au-
tomatically darkens the lens the moment you
start welding. No matter what shade the filter
is set to, the UV/IR protection is always present.
ARC Rays can injure eyes and burn skin
Before welding, always inspect helmet and au-
to-darkening filter (ADF) to be sure they are fit-
ted properly and in good condition.
Keep the sensors, solar cell and filter lens clean.
Clean the filter cartridge using a soap water
solution and soft cloth. Do not use solvents or
abrasive cleaning detergent.
Do not weld in the overhead position while us-
ing this helmet.
Inspect the filter lens frequently and immedi-
ately replace any scratched, cracked, or pitted
filter lens or cover lenses.
Always wear safety glasses or goggles under the
welding helmet, and protective clothing to pro-
tect your skin from radiation, burns and spatter.

FEATURES

6
11
13
KNOW YOUR TOOL
WHOLE PRODUCT
1. Helmet shell.
2. Headgear Height Adjusting Pin.
3. Headgear Diameter Adjusting Knob.
4. Headgear Angle & Distance Adjusting Knobs.
5. Shade No. Adjusting.
6. Front Cover Lens.
7. Solar Panel.
8. Fixed Plate.
9. Press card.
10. UV/IR Filter.
ADF GX-400S
11. Delay Control Knob.
12. Sensitivity Control Knob.
13. LCD.
14. Solar Panel.
15. Arc Sensors.
16. UV/IR Filter.
12
14
15
16