Mark MBS Serie Instrucciones De Usuario página 5

ACTIVE SERIES
1. USB Port
2. LCD Display
3. MIC input. XLR3 /Jack 1/4" MIC input
4. USB/SD level. This is used to adjust the signal level of the USB/SD inputs.
5. MIC Volume control. It is used to adjust the signal level from the Microphone input.
6. LINE Volume control. It is used to adjust the signal level from the LINE input.
7. TREBLE control. It provides a boost or cut of up to 15 dB for the high frequency.
8. BASS control. It provides a boost or cut of up to 15 dB for the low frequency.
9. LINE Input. XLR 3 pin/ RCA connectors for line level devices.
10. LINE Out. XLR 3 pin connector in order to send the pre-amplified signal to another amplified device.
11. Extension loudspeaker. XLR 3 pin connector in order to feed a passive loudspeaker
12. On/Off Power switch. Press it to power on/off the device
13. AC power. Connect the incorporated AC power cord.
14. Voltage selector switch. Select the correct voltage input
15. SD port.
MBS/2 Series (Active/Passive) - 4 -
EN
User Manual / Manual de uso