Haier HCR7918EIMP Guia Del Usuario página 18

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 104
Use
Notice
After setting the temperature, if there is no operation within 5 seconds, the system will
be automatically determined and save the set temperature.
Adjust the temperature for Switch Zone (S-Zone)
When the display screen is unlocked, press the button "F" (Zone selector). The buzzer
rings once, the indicator "f3" (S-Zone indicator) flashes, and then here comes the tem-
perature setting mode of the S-zone.
1. Press the button "D" (Temperature adjustment button "-") every time, the buzzer
rings once, the set temperature of the S-zone will be reduced by 1. The S-zone tem-
perature will display in the sequence of "-6°C ->-7°C->-8°C ->-9°C ->-10°C ->-11°C
->-12°C->-13°C ->-14°C ->-15°C ->-16°C ->-17°C->-18°C->5°C ->4°C ->3°C-
>2°C ->1°C ->0°C ->-1°C ->-2°C->-3°C->-4°C ->-5°C ->-6°C".
2. Press the button "E" (Temperature adjustment button "+") every time, the buzzer
rings once, the set temperature of the S-zone will be increased by 1. The S-zone
temperature will display in the sequence of "-6°C ->-5°C->-4°C ->-3°C ->-2°C ->-
1°C ->0°C->1°C ->2°C ->3°C ->4°C ->5°C ->-18°C ->-17°C ->-16°C ->-15°C->-
14°C ->-13°C ->-12°C ->-11°C ->-10°C->-9°C->-8°C ->-7°C ->-6°C".
Notice
After setting the temperature, if there is no operation within 5 seconds, the system will
be automatically determined and save the set temperature.
Super-Cool function
1. When the display screen is unlocked, press the button "G" (Super-Cool selector),
the buzzer rings once, the indicator "g" (Super-Cool function) illuminates, and then
the Super-Cool function will be turned on.
2. When the indicator "g" (Super-Cool function) illuminates, press the button "G" (Su-
per-Cool selector), the buzzer rings once, the indicator "g" (Super-Cool function)
goes off, and then the Super-Cool function will be turned off.
3. After the Super-Cool function is turned on, the refrigerator will automatically turn off
the function when it reaches the set condition. If you want to exit manually, you can
press the button "G" (Super-Cool selector) to turn it off.
Indicator off
16
Press '-' 1 time
Press '+' 1 time
Press 1 time
Indicator on
Press 1 time
Indicator off
GB

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Hcr7918eimbHcr7918enmp

Tabla de contenido