allen+roth 67691W-6204 Instrucciones De Montaje página 4

ASSEMBLY INSTRUCTIONS
2a. Optional Flange Installation
Before installation, ensure that the flange (1) is
placed on the bottom of the new faucet assembly (A).
Place the faucet assembly (A) through the mounting
hole in sink.
2b. Optional Deckplate Installation
Before installation, remove the flange. Align the hole
in the gasket (C) and deckplate (B) with the mounting
hole in the sink. Place the faucet assembly (A) through
the deckplate (B) and mounting hole in the sink until
the faucet assembly (A) sets on top of deckplate (B).
NOTE: If the sink is uneven, use silicone under the
gasket (C).
3. Secure the faucet assembly with the washers (D) and
nut (E). Hand tighten the nut (E) onto the faucet
assembly. Lock the nut (E) into position by tightening
the screws (F) with a phillips screwdriver. Do not over
tighten.
2a
2b
3
1
4
A
1
A
B
C
D
E
F