Technaxx TX-22+ Manual Del Usuario página 10

Recording AUX IN
1. Set the function button to TAPE/AUX mode and then insert a memory
device (USB drive or SD card).
2. Press the record REC button, it will take 3 - 4 second to read the memory
device, then the USB or SD icon will be flashing on the LCD display.
3. Music will be recorded to the last inserted flash drive (USB or SD).
4. The system will start the recording mode after a few seconds. Insert your
cassette into the playback slot. During encoding, the USB or SD icon will be
flashing on the display.
5. To finish the recording, press the stop button. The display will show "END"
and return to TAPE/AUX mode.
NOTE:
 The recording speed is 1:1. Recording will take as long as playing the CD
(or other auxiliary input).
 The recording format is preset at MP3 bit rate 128Kbps.
 To enjoy the function, user need to select the function switch to AUX-IN
position, and AUX-IN source will be prior to tape play.
 When you insert both USB drive and SD card, the recorded file will be saved
into the latter inserting device.
The USB Port and SD Card Slot
The system is able to
decode and playback all
MP3/WMA files stored in
the memory
connected to the USB
port or SD card slot.
media
10