Phonocar VM 313 Manual De Instrucciones página 9

FUNCTIONS
SIMPLIFIED ACTIVATION
When connecting for the first time, introduce 3G-modem to the SIM-card, with no PIN at all. In doing so, the Router can
AUTOMATICALLY enter the INTERNET-function. To protect your Internet-connection, insert a Password , by following
the related Instructions.
1
this password, first enter the Router, then follow the procedure on display.
Password. It is advisable to change the Router's log-in-credentials, by choosing your own user-password. In case you
forgot your password, keep Reset-key on the Router pressed for at least 5 seconds, so that factory settings and "hame"-
password can be re-established.
COMPUTER-SETTINGS
• Establish your Internet-connection and open the wireless-network on
your Computer. • On your Computer, select following two options: "get
IP-address automatically" and "get DNS-Server automatically". (fig.1)
• On your Computer, set "WIFI"-function to "ON". When WIFI-connec-
tion is established, select "Up-date List of wireless-networks". • On
the Router, select the wireless-network-page "wireless-connection"
and the option SSID Phonocar-VM313. • Make sure WIFI-connection
and Internet-access are well established (fig.2). Note: if your Computer,
or other device, has no WIFI-function, use cable RJ45 to connect the
WIFI-device, or your Computer, to the Router, through the LAN-exit.
• In case of navigation-problems, act as follows: Open Web-Browser
and digit http://192.168.169.1 on the Internet address-bar. Then press
ENTER and introduce password "hame" (fig.3). If you wish to change
9
GB