Briggs & Stratton 01928-0 Manual De Instalación Y Del Operario página 8

Figure 3 — A Typical Installation Diagram for Transfer Switch
Utility
Connection
Generator
Connection
Ground Lug
To Generator
1. Terminals on control module are for installer supplied
contactors to lock out large loads. Example: air
conditioner, electric hot water heater, etc.. Contacts
are connected in series with the contactor control
circuit (Figure 4).
2. Tighten all wire connections/fasteners to proper
torque. See inside transfer switch enclosure for proper
torque values.
Briggs & Stratton Power Products Automatic Transfer Switch
Installation and Operator's Manual
To Utility Meter
Supervisory
Contacts
Load
Connection
Neutral
Terminal
Main Distribution Panel
Main
Neutral
Bus
Ground Bus
Figure 4 — Terminals on Control Module
Air Conditioner Contactor
8
Supply
Contactor
Neutral
120 VAC