Steren INT-100 Manual De Instrucciones página 17

Buzzing, interference
• Another transmitter interfering. Set the CH selectors of both the transmitter and receiver to another
setting.
Shrill noise
• Receiver is too close to the transmitter.
• Volume is too high.
Should any problem persist after you have made the following checks, consult your nearest Steren
dealer.
SPECIFICATIONS
Transmitter
Input: 120V~ 60Hz 3W
Receiver
Input via batteries: 6Vcc (4 AAA batteries - not included)
Input via AC adapter: 9Vcc 200mA
Nominal consumption: 2.1 kWh/month
Stand-by power consumption: not applicable
Product design and specifications are subject to change, without notice.
17