Descargar Imprimir esta página

SOLAC Aroa Premium Instrucciones De Uso página 3

Hervidor de agua

Publicidad

Idiomas disponibles

Idiomas disponibles

ESPAÑOL
ENGLISH
DESCRIPTION
1 Hinged lid
2 Lid opening button
3 On/off switch
4 Red on light
5 Insulated handle
6 Body of the appliance
7 Base
8 Filter
9 "Prog" programming button
10 Temperature selection buttons
11 Blue programming light
12 Display screen
USE AND CARE:
Do not switch the appliance on without water.
Do not use the appliance if the on/off switch
does not work.
human consumption is recommended.
Never leave the appliance connected and un-
attended if is not in use. This saves energy and
prolongs the life of the appliance.
Take care when handling recipients containing
liquids heated in this appliance as they may
boil fiercely.
SERVICE:
Make sure that the appliance is serviced only
by specialist personnel, and that only original
spare parts or accessories are used to replace
existing parts/accessories.
Any misuse or failure to follow the instructions
for use renders the guarantee and the manu-
facturer's liability null and void.
INSTALLATION
- Make sure you have removed all packing
material. In order to prevent possible risk of
accidents, do not leave items such as plastic
bags, polystyrene or cables within the reach of
children.
FULLY UNROLL THE APPLIANCE'S POWER
CABLE BEFORE EACH USE.
Clean the appliance following the appliance
cleaning instructions in this manual.
Place the appliance on a flat, stable surface
that can withstand the weight and heat emitted
from the appliance.
USE:
Open the lid (1) by pressing the opening button
(2).
Fill the body of the appliance (6) with cold drin-
king water.
Place the body of the appliance (6) on its base
(7).
Plug the power cable in to a socket.
Close the lid (1) of the appliance.
Press the on/off switch (3) to turn the kettle on.
The red on light (4) will come on. The display
screen (12) will show "ON".
The kettle may be turned off manually using
the on/off switch (3) again or will switch off au-
tomatically then the water has boiled.
TEMPERATURE SELECTION FUCTION:
Open the lid (1) by pressing the opening button
(2).
Do not move the appliance while in use.
Use the appliance handle/s, to catch it or move it.
Do not use the appliance if it is tipped up and
do not turn it over.
Do not turn the appliance over while it is in use
or connected to the mains.
Respect the MAX and MIN levels. (Fig.1)
Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
Store this appliance out of reach of children
and/or persons with physical, sensory or redu-
ced mental or lack of experience and knowle-
dge.
Do not store the appliance if it is still hot.
The appliance is only intended for heating wa-
ter; as a consequence the appliance should
not be used for the cooking or heating of milk...
The use of bottled mineral water adapted for
Fill the appliance (6) with cold drinking water.
Place the body of the appliance (6) on its base
(7).
Plug the power cable in to a socket.
Close the lid (1) of the appliance.
Press the on/off switch (3) to turn the kettle on.
(Original instructions)
EN
ES

Publicidad

loading