Koenic KBT 200 Manual De Instrucciones página 16

English
Insert/change rechargeable battery
Press down and hold the release button. Slide
1
off the battery compartment cover. Insert the
rechargeable battery.
To close the battery compartment, slide back
the cover while holding the release button
pressed. Ensure the cover is locked correct.
Charging the battery
Connect the charging adapter to the DC IN
2
socket on the charging stand and plug the
power adaptor in a suitable power outlet.
Put the product on the charging stand.
3
The LED indicator turns red and shows the
battery is being charged. The indicator turns
green, when the battery is fully charged.
Note
Ensure that the product is switched off before
charging. Make sure that the on/off switch is
switched down.
LED indicator
LED-Color Condition
No color
Red
Green
Red
16
IM_KBT200_150616_V05_HR.indb 16
All manuals and user guides at all-guides.com
During operation.
During charging.
Charging completed. Fully charged.
During operation, when the battery
level is less than 20%.
Operation
Trim/cut beard – with comb attachment
Slide the comb attachment on the blade and
4
sure it's fit in correctly.
Set the desired cutting length by sliding
5
the comb attachment. You can choose the
lengths 0.5, 1.5, 2.5, 3.5, 4.5 and 5.5.
Switched on the beard trimmer. The LED
6
indicator flashes one time in red.
Guide the beard trimmer slowly over the
7
beard. Hold the trimmer in such a way that
the comb is as flat as possible.
Note
Depending on the position of the product and
the resulting angle, cutting lengths may differ.
Trim/cut beard – without comb attachment
Slide carefully the comb attachment upwards
8
with thumb and moderate force.
Without comb attachment the beard can be
9
cut to an even length of 0.3 mm. Switch on
the trimmer and hold the shaving head at the
desired height of the beard.
16/6/15 5:39 PM