OPERATING INSTRUCTIONS
Step 1: Plug in the machine into the socket.
Step 2: Add water to the water tank with cup included in the machine.
Step 3: Press "ON" to start the machine.
Step 4: Water is pumped into the water tray from the water tank. It takes about 30 seconds.
Note: If no water is pumped up to the water tray, over two cycles but the water in water tank is
enough, then please open the drain cap, and let several drops water runs out.
Then press
to restart the unit
Step 5: Ice making cycle begins. The evaporator in the water tray starts to form ice onto the
evaporator fingers.
Note: For the first three cycles, the ice may be small and irregular in size.
Step 6: Once ice making cycle completed, the water tray will tilt forward; the remaining water will
flow back to the water reservoir and the ice cubes will drop from the fingers. You will hear
a sound as the ices cubes are released. Ice are dropped to the ice basket directly
Step 7: In about 30 seconds, the water tray will tilt backward. Once the water tray returns to its
leveled position, the second ice making cycle begins.
Step 8: Press "OFF" to stop the machine.
23