PNI SafeHome PT225G Manual Del Usuario página 7

5. In the application select from the left menu
Sensors - Gas detector (WiFi)
6. Select the WiFi network you want to connect
to and add the network password.
7. Plug in the detector. The green LED will flash
quickly. If it does not flash quickly, press the
Reset key for about 5 seconds until the green
LED flashes quickly.
8. Tap Next and select Blink quickly.
9. Wait for the application to identify the
detector.
10. After identifying your detector, press the
Done button.
11. After pairing, the LED (test button) lights
green (monitoring state). In the event of an
alarm, the LED turns red.
7 - User manual