Publicidad
Idiomas disponibles
Idiomas disponibles
The 'Default CAP' group allows for default priority mapping of packets that do not have a VLAN or TOS bit (or
if these are disabled). Setting are available for Unicast (directed to a host).
IGMP - (efault CAP 3) – sets the channel access priority for IGMP frames – these are the group
management frames, not the stream data
Unicast – (default CAP 1) – sets the default channel access priority for unicast frames not matching
any other classification or mapping.
IGMP managed Multicast Stream (Fixed to CAP 2) – sets the default channel access priority for
stream data belonging to a snooped IGMP multicast group.
Multicast/Broadcast – sets the default CAP for multicast frames not in a snooped group and for
broadcast frames.
After making CAP settings, clicking the Write button will commit these, along with the values from the
Configuration tab, to NVRAM on the connected device.
All manuals and user guides at all-guides.com
Ethernet Powerline Adaptor
51
Publicidad
Capítulos
