EN
Summary
Thanks you for purchasing
and operate the fixture according to these instructions to avoid possible damages and accidents
causing by misusage.
Product introduction
SUPERBAT LED 712
It adopts high power 4-in-1 LED, which refers to single LED is made of R,G,B, W, A, UV 6-in-1 LED, and
long life span, low consumption, good color mixing effect and high brightness are the most prominent
features. Each kind of LED can be independently dimmed. The built-in programs include dimming
stroble, gradual change and fading. It performs low weight and consumption,
stable capability and long life. Standard DMX 512 signal is requested.
Safety Notes
- Enquire the authorized technical people to repair the unit.
- Always make sure disconnect from the power source before setting up, serving and moving.
- Avoid direct eye exposure to the fixture when it is on.
Make sure the power supply voltage are consistent with this device. Ensure the use of voltage is in
●
the range of the technical parameters requested.
Before the installation, please, check if the device is in good conditions and appears no damage.
●
This device is designed for indoor.
●
The fixture maybe mounted in any position provided there is adequate room for ventilation. Make sure
●
there are no inflammable and explosive items in 0.5 meter around.
Yellow/green cable cabling earthling safety, do not remove it
●
1.
Summary
SUPERBAT LED 712
uses casting aluminum housing, designed in a fashion form.
2. Safety Instructions
SUPERBAT LED 712
. Please, read these instructions carefully before begin
- 1 -
User Manual/Manual de Uso