Assembly and Use
2
Tilt Button
1
Crank Handle
Step 3: Turn crank handle in clockwise direction (to right) until canopy is fully
opened. Turn crank handle in opposite direction to close canopy and secure
with attached strap. To close the umbrella, it must be in the upright position.
You can tilt the umbrella to the right or left by pressing the tilt button to re-
lease the umbrella top. Release the button to maintain desired angle.
Step 4: Insert umbrella into a heavy umbrella base no less than 50 lbs (not
included). Tighten locking nut on side of base to safely secure umbrella.
4
E