Safety Notes; Symbols In These Instructions; Ce Conformity And Emc - Fluke EDDYTHERM 2x Manual De Instrucciones

2. Safety notes

For some customers, EDDYTHERM 2x will be the first induction heater they
have worked with. The following information will familiarize you with
the main features of the device. In particular, you should read the safety
recommendations carefully and make sure you understand them.

2.1 Symbols in these instructions

The following symbols are used in these operating instructions to draw
your attention to important sections. These sections point out possible
sources of danger, or provide useful information on how to operate the
equipment.
1
 Symbol alerts you to danger that may result in personal
injury.
2
 Symbol alerts you to danger arising from incorrect operation
that may lead to property damage.
 Symbol 3 alerts you to hot surfaces.
4
 Symbol alerts you to magnetic fields.
 Symbol 5 indicates that device may only be used by operators
without heart pacemakers or similar implants that are sensitive
to electromagnetic fields.
6
 Symbol indicates that wrist watches may be affected by
magnetization.
 Symbol 7 indicates that protective gloves should be worn.
8
 Symbol indicates that the operating instructions should be
read carefully.
9
 Symbol denotes general information and tips regarding
operation of EDDYTHERM 2x.
 Symbol 10 indicates the connector for the temperature probe.

1.2 CE conformity and EMC

All versions of EDDYTHERM 2x are in compliance with Directive
2006/95/EC of the European Parliament and of the Council relating to
electrical equipment designed for use within certain voltage limits,
Directive 2004/108/EC of the European Parliament and of the Council
relating to electromagnetic compatibility and Directive 2002/95/EC
relating to restriction of the use of certain hazardous substances in
electrical and electronic equipment.
1
2
3
4
5
6
7
8
9
10