CM IP-TC
CM MANAGEMENT
• General description
• The CM Management is a PC software that allows to local and remote programming of a headend, including one or several CM headend modules
• Its latest version is downloadable from the website
• Each SW version may include new firmware releases for the CM Headend modules. Modules are upgraded by using this SW.
• Main screen:
Headend
management
Room for the
identification of
all CM modules
connected to the
FA 524 (PSU)
Room for the programming
of each module
www.ek.plus
Headend management functions
USB detection of the connected CM modules
Connection to the CM headend by
LAN/Internet (RJ45 connector)
If enabled, allows the upgrade of the
modules connected to the power supply
Disconnection from the CM Headend (USB)
Loads a file into all CM modules connected
an already stored preconfiguration. This
allows cloning predefined configurations.
Saves a file to the computer including the
configuration of all CM modules connected
to the power supply.
Generates a report of the current
configuration (.html) of the CM modules
If the module allows it, it switches the
output betweenDVB-T (COFDM) and DVB-C
(QAM)
EN
13